MTB SIX

We would like to present you our offer to purchase of a modern, two-story house 88 sqm – model MTB SIX.

The offer includes all elements prefabricated in our factory..

The assembly of the house is carried out using the attached instruction, in which we have described each
stage of the work, step by step. Including the list of the materials needed at each of the stages.

The purchase includes all the materials for putting the house in a closed, unfinished state. From wall panels, foams,
membranes to screws. We use for our houses only reputable companies such as:
Budmat, Swiss Krono, MTB Modules, Veka, Marcopol.

All elements have been cut and numbered already at the production stage.

Our time spent in the factory on the prefabrication process reduces the scope of work, that has to be done during
conventional construction method by more than 70% and it also reduces the costs by up to 65%.

Product accuracy in factory conditions, supervision of quality control at every stage of production, qualified staff and
short time of order realization distinguishes our offer form the wide competition.

Experienced builders can build this house in 12-15 days. Considering the already quick time of realization compared
to traditional methods, people with basic construction knowledge can build it in 18-21 days.

The control of the outside teams by the investor is also easier, because every phase of construction is clearly described in
the instruction.

Very important factors are: working time reduction, which is associated with constant increases remuneration of
teams, lower power consumption, less noise during the work, waste reduction to a minimum and costs related to
their disposal, no drying time for materials during construction (works are carried out dry), no need to insulate the
building after erecting the walls (panels SIP have a 15 mm EPS core), reducing costs and the number of departures
for missing items (everything is delivered at once) as well as reducing the amount of unnecessary purchased
materials, the possibility of assembly at any time of the year and completion of the entire investment, with furniture
in less than a month from the start of the work.

The interior design presented in the photo gallery is only a proposal and inspiration for a future customer. Our offer
consists of a DIY house in state closed, unfinished. The building looks just like on the last photo.

The height of the ridge pole is over 230 cm. The height on the ground floor is 250 cm. It is ideal height and does not
overwhelm as in case 220 cm.

Four, large, opening skylight 68×118 cm let in enough sunlight. Windows are mounted on the expanding tape, not a
foam like before. Window factor ʹ 0,70W/sqm. Made of high-quality material.

The security door, ergonomically wide ʹ 90 cm. Ensures comfortable use. Made of high-quality material. They are
heavy and quiet. Core- 55mm

Two large gable windows of a size 206x119x169 ʹ one of them is non-opening, the second one can open and tilt.
Triple-glazed, PCV, outside in anthracite color and inside in white. Mounted on the expansion tape. Window factor:
0,70 W/sqm.

The balcony door, open/tilt, 238 H x 248 W with an opening wing 80 cm wide and permanent site. Windows are
triple-glazed, PCV, outside in anthracite color and inside in white. Window factor ʹ 0,70W/sqm.

The living room window 118 H x 117 W, open/tilt, triple-glazed, PCV, color anthracite outside and white inside.
Mounted on the expansion tape. Window factor ʹ 0,70W/sqm.

The patio door 213 H x 103 W, open/tilt, triple-glazed, PCV, outside in anthracite color and inside in white. Window
factor: 0,70 W/sqm.

The bathroom window 117 H x 60 W open/tilt, triple-glazed, PCV, outside in anthracite color and inside in white.
Mounted also on the expanding tape.

The construction of the house based on branded wood, certified C24 -Scandinavian wood, which does not need
impregnation (humidity around 18%).

SIP panels as elements of walls, external walls, partition walls, mezzanine floor and roof.

Windproof membranes for elevation, facade laths, modern roof type membrane “Pasta” (under teh seam sheet). A set of screws (all Torx type) – certified.

The routing foams and branded foam gun, waterproofing to protect the bottom of the wall external, polystyrene grater ʹ
needed occasionally to correct the material allowance and during occurrence of non-standard modifications for example :
installation of an additional window (this stage of work only on your own range). “Taker” type staples – membrane
fastening. Mineral wool strip needed to seal the ridge. Fundamental foil 30 cm wide for foundation.

Elevation boards and roof soffit ʹ pine, around 14 cm wide which do not require sanding (it is enough to tint with the
impregnation in the selected color). Boards mounded with “Torx” screws. Dry material (humidity around 18%).

Modern seam plate roofing made by brand Budmat. It is a leading manufacturer of roofing plates and more. Color of
the roofing RAL 7016 ʹ anthracite MATT. The assembly of the roofing with the use of “farmer” fasteners is carried out
in invisible places (under the sheet overlap).

Plate model ʹ Iron Click

The latest system on the market, that is easy to install.

The facade plate is the same model described above ʹ without exception. All elements are prefabricated to the size.
Flaps and other flashing are also in the same color RAL 7016 ʹ anthracite MATT (as above).

Each element from wall panels to screws, foam and tiny staples have own unique code, which is assigned to each
assembly stage.

We transport houses to anywhere in the world (anywhere where it is possible). The cost of transport is calculated
individually. Self-pickup is also possible.

Warranty for the set ʹ 3 years.

At this moment, the order fulfillment time is 40 days long from signing the contract. We start realization by an
advance payment – 40% of the order value. The payment of the rest amount (60%) takes place within three days
before the departure from our factory or self-pickup. You will need three people to unload the elements. The drivers
only help with unloading.

The heaviest elements of the set are maximum 200kg