fbpx

Specifications

Skip to page sections
Technical Specifications • Verified build-ups

Specifications

This page is the technical hub for KC systems. Therefore, you can compare build-ups, options and performance paths before requesting a quote pack.

✓ Verified ISO Frame build-ups
✓ Options: Standard / REI60 / Part L
✓ Typical quote response within 48h
✓ UK-ready specifications
Primary phone: 01782 561110 • Email: [email protected]
Local context examples: Cardiff / Caerdydd (Wales), Edinburgh / Dùn Èideann (Scotland), Manchester (Greater Manchester), Bristol (Somerset).
Technical specifications hub for modular buildings in Stoke-on-Trent, Staffordshire, UK
Description: Technical hub — verified wall, roof and floor build-ups for modular systems — Stoke-on-Trent, Staffordshire.
Caption: KC Specifications — verified build-ups and option paths (Stoke-on-Trent, Staffordshire).
Slide 1 of 4

Specifications by system

Start with the system. Then compare option paths. Consequently, you’ll know what to request in the quote pack.

Request a Quote →

ISO Frame Systems (verified)

Standard, REI60 fire-rated, and Part L 2021 A-rated paths with hard build-ups.

Custom Modular Systems

Specification is project-led. Therefore, we confirm the final build-ups in the quote pack.

Need help choosing?

Tell us the use case and postcode. Then we recommend the system and option path.

ISO Frame — verified master specification

Standard, REI60 fire-rated, and Part L 2021 A-rated paths. Therefore, you can request the exact option set that matches your project brief.

Request ISO Frame quote →
Spec area STANDARD ISO FRAME UNIT REI60 FIRE-RATED ISO UNIT PART L 2021 — A-RATED UNIT
Manufacturing & compliance
  • ISO 9001 Quality Management
  • ISO 1090 Structural Steel CE Certification
  • ISO 3834 Welding Quality Assurance
  • ISO 14001 Environmental Responsibility
  • ISO 27001 Information Security
  • ISO 22301 Business Continuity
  • ISO 8501 Surface Preparation Standard
Structure
  • Cold-bent steel profiles
  • Bolted construction (flat-pack capability)
  • Welded per EN ISO 3834-2
  • CE marked EN 1090-1
  • Abrasive blast-cleaned to Sa 2.5
  • Stackable up to three floors
  • Fire-rated frame
  • Painted in cabin dryer
  • Stackable up to 2 floors
  • Fire rating: REI 60 (60 min)
  • Designed to comply with England Building Regulations Part L 2021 (Non-Domestic)
  • A-Rated energy-efficient build-ups (roof/walls/floor below)
Roof build-up
  • 0.5mm galvanised steel sheet
  • 10mm chipboard
  • 100mm mineral wool insulation
  • Polyethylene vapour barrier
  • 8mm interior laminated board (white)
  • Integrated drainage via frame and downpipes
  • Snow load: 1.6 kN/m²
  • 0.55mm steel
  • 10mm fibre board
  • 60mm mineral wool
  • Vapour barrier
  • 60mm wool panel
  • 2× fire-resistant plasterboards
  • Snow load: 1.6 kN/m²
  • 0.5mm steel
  • 10mm chipboard
  • 125mm PIR
  • Vapour barrier
  • 60mm mineral wool panel
Wall build-up
  • 0.5mm exterior trapezoidal steel
  • 80mm mineral wool core
  • 0.5mm internal smooth sheet, RAL 9010
  • External 0.5mm steel
  • 120mm Rockwool fire insulation
  • Internal 0.5mm sheet, RAL 9010
  • External steel
  • 240mm mineral wool insulation
  • Internal smooth panel, RAL 9010
Floor construction
  • 22mm P5 chipboard
  • 100mm mineral wool insulation
  • 0.5mm galvanised steel underside
  • Load capacity: 2000 kg/m²
  • 20mm cement-fibre board
  • 100mm mineral wool
  • 0.5mm steel underside
  • Load: 200 kg/m²
  • 20mm cement board
  • Polyethylene sheet
  • 120mm PIR + 0.5mm steel
  • Additional 120mm PIR + 0.5mm steel
  • Load: 200 kg/m²
Floor finish (standard)
  • 2mm commercial-grade PVC
  • Grey finish
  • Sealed joints
  • Grey PVC strips
As specified (project dependent) As specified (project dependent)
Windows
  • PVC frame
  • Exterior RAL 7016 / interior white
  • U-value 1.1 W/m²K
As required by fire strategy and specification path
  • Windows & glazed doors U-value 0.5 W/m²K
  • Energy-efficient double glazing
  • Anti-vision privacy film
Doors
  • DDA PVC glazed door 1150×2100 mm
  • Exterior RAL 7016 / interior white
  • Insulated glazing
  • 3-key cylinder lock
  • Steel single door 900×2000 mm, thermally insulated, secure locking
As required by fire strategy and specification path Glazed openings per Part L path (see upgraded openings)
Electrical (UK standard)
  • Full 230V electrical system
  • Convector heaters
  • IP65 LED light fittings (2×18W)
  • Metal consumer unit
  • UK sockets and switches
Full 230V electrical system (project dependent) Full 230V electrical system + heat pump integration (project dependent)
Heating / Cooling Convector heaters As specified (project dependent) 4.5 SCOP Air-Air Heat Pump (heating/cooling)

Need this spec inside a formal quote pack? Request a quote and we will confirm the exact option path for your project. Typical quote response within 48h. Primary phone: 01782 561110.

ISO Frame colour options (verified RAL lists)

These colour lists are verified for ISO Frame. Therefore, you can request frame and panel colours confidently in your quote pack.

Frame RAL options

Available frame colours: 3000, 5010, 7016, 7035, 9002, 9010.

RAL 3000
RAL 5010
RAL 7016
RAL 7035
RAL 9002
RAL 9010
Tip: pair frame colour with panel colour for branding (office parks, clubhouses, public buildings).

Wall panel RAL options

Available wall panel colours: 5010, 7016, 7035, 9002, 9010.

RAL 5010
RAL 7016
RAL 7035
RAL 9002
RAL 9010
Note: internal smooth sheet/panel is specified as RAL 9010 in the standard wall build-up.

What you receive in a KC quote pack

The quote pack turns specifications into a decision-ready scope. Therefore, it supports approvals and reduces misunderstandings.

  • System selection and option path (e.g., Standard / REI60 / Part L 2021).
  • Specification summary aligned to intended use.
  • Inclusions and exclusions, plus assumptions.
  • Delivery and installation approach (including phasing where needed).
  • Next steps list for site readiness (access, groundworks, utilities).

Typical quote response within 48h (Mon–Fri) once we have your use case, size/layout and postcode.

Useful official references

These are non-competitor authorities commonly referenced in UK projects.

Specifications — FAQ

Short answers designed for Google snippets and AI search.

How do I choose between Standard, REI60 and Part L 2021?
Standard suits typical use, REI60 is selected for enhanced fire performance when required, and Part L 2021 focuses on energy performance targets.
Can I request a specific RAL colour?
Yes. ISO Frame has verified frame and wall panel RAL option lists. For Custom Modular, colour matching is project-led.
How quickly will you respond with a quote?
Typical quote response is within 48 hours (Mon–Fri) once we have use case, size/layout and postcode.
Where do I find delivery and compliance information?
Use the “Delivery & Installation” and “Compliance & Regulations” pages linked above. They explain access planning and baseline UK references.

Need a spec-matched quote pack?

Send your brief — we’ll confirm the right system and option path. Typical quote response within 48h (Mon–Fri).